EAW EAWPilot Manual do Utilizador descarregar pdf (Página 8)

Now that the computer and hence EAWPilot has

a static IP Address, the address for the UX8800 or

multiple UX8800’s must be congured.

1) From the EAWPilot homepage, select “Tools”

and then “Communications”. This opens up the

“Dialog” menu within Pilot.

2) Check the box for “Specify Target IP Addresses”.

This puts EAWPilot into Static IP Address mode

3) In the Target IP Addresses number string, enter

the numbers exactly as you entered them on

the UX8800

4) Click the “Add” button to enter the IP Address

to the list. Then click “OK” to identify that this

is the IP Address that the computer will use to

communicate to the UX8800

Note: Multiple addresses can be entered in this

column for recognition from EAWPilot but it is

best to remove any unnecessary addresses as

EAWPilot will continue to search for them.

Setting A Dynamic IP Address

If you plan on using or installing multiple UX8800’s, you may want to consider using a Ethernet hub

which will act as a DHCP server and automatically congure IP addresses as long as the computer and

UX8800’s are set to dynamic mode.

Another option is to use Ethernet to communicate to the

rst unit and then U-Net to communicate to the others.

1) Locate the “Local Connection Properties”

page on your computer (Found Under “My

Computer).

2) Go to “Internet Protocol (TCP/IP). Select it and

click on “Properties”.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sem comentários

EAW EAWPilot Manual do Utilizador Página 8