Eaw MQ1215 Manual do Utilizador descarregar pdf

• Low frequency array module

• Two 15 inch woofers

• Engineered to array with MQ1300 MF/HF modules

• For permanent installation only

• Digital signal processor required for specified performance

The MQ1215 uses two direct radiating 15 inch cones mounted

in a vented trapezoidal enclosure. Its frequency response has

been optimized for use as a dedicated low frequency system

when used with a companion MQ mid/high loudspeaker. Each

driver has its own connections on the input panel. This allows

the drivers to be connected in parallel to one amplifier chan-

nel or connected individually to separate amplifier channels.

The enclosure features a comprehensive system of 3/8-16

threaded suspension points.

The MQ Series comprises matched sets of mid/high and low fre-

quency enclosures with complementary dimensions. This facil-

itates creating attractive arrays that provide high definition

sound within tightly controlled coverage areas. The MQ1215 is

designed to work with a complementary MQ1300 Series

mid/high loudspeaker to create a full range audio system. The

enclosure is vertically configured for arraying in horizontal

rows. Horizontal arrays are typically used in venues where the

array must address wide, fan-shaped audiences.

The most common array configuration is two MQ1364e's or

MQ1366e's separated by a single MQ1215. In such an array, the

MQ1364e's or MQ1366e's should be splayed 25° to either side

of the MQ2315, netting a splay angle of 50° between mid/high

modules. When arraying two MQ1394e's separated by a single

MQ1215, all enclosures should be tight-packed to achieve opti-

mal coverage. This configuration will net a splay angle of 80°

between mid/high modules. All splay angles reference the cen-

ter line of the enclosures.

SPECIFICATIONS MQ1215

DESCRIPTION

APPLICATION

FEATURES

PHYSICAL

PERFORMANCE

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. MQ1215/0004850/001/2 pp September 2002 Printed in USA

Configuration Dedicated LF module

LF Subsystem 2x 15 in woofers

Enclosure Material

Exterior grade Baltic birch plywood

Finish

Wear resistant textured black paint

Connectors 4-contact barrier strip &

1x Neutrik NL4 Speakon

Suspension Hardware 16x 3/8"-16 threaded mounting/

suspension points (4 each top,

bottom and sides)

Grille Powder coated perforated steel

Dimensions inches millimeters

Height 40.00 1016

Width (front) 24.00 610

Width (rear) 12.75 324

Depth 21.00 533

Trapezoid Angle 15° per side

Weights pounds kilograms

Net Weight 128 58.2

Shipping Weight 140 63.6

Frequency Response

±3 dB 50 Hz to 1.3 kHz

-10 dB 40 Hz

Axial Sensitivity (dB SPL, 1 W @ 1 m)

LF 100

Impedance (Ohms)

LF1/LF2 8/8

LF Paralleled 4

Power Handling, AES Standard (Watts)

LF1/LF2 800/800

LF Paralleled 1600

Calculated Maximum Output (dB SPL)

LF Peak 138

LF Long Term 132

Nominal Coverage Angle/-6 dB points (degrees)

Horizontal 160

Vertical 100

Recommended High-Pass Frequency

24 dB/Octave 40 Hz

1 2

SPECIFICATIONS MQ1215 1

Resumo do Conteúdo

Página 1 - SPECIFICATIONS MQ1215

• Low frequency array module• Two 15 inch woofers• Engineered to array with MQ1300 MF/HF modules• For permanent installation only• Digital signal proc

Página 2

SPECIFICATIONS MQ1215DIMENSIONAL DRAWINGINPUT PANELA & E SPECIFICATIONSOne Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013

Comentários a estes Manuais

Sem comentários

Eaw MQ1215 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Microfones Eaw MQ1215. EAW MQ1215 User Manual [en] Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Microfones Eaw MQ1215